£72.99
Out of stock
CNC Aluminum Hopup Chamber M4A Pro (with BB Latching System) unit is precisely machined to perform accurately and consistently on Tokyo Marui (include G&G, KRYTAC) Standard M4/M16 AEG series. Compatible with any KWA M4 AEG variant, however will require minor modification to the stock KWA air feed nozzle.
The Hopup Chamber M4A unit is built with an aluminum Rotary Dial Knob for fine hopup adjustments, the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot.
The Hopup Chamber M4A unit is designed to accept 21.00mm to 21.25mm nozzle length, and fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use.
The Hopup Chamber M4A unit is wisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore AEG Gearbox/HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are optional)
Also mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots, and included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting.
More than that, the Hopup Chamber M4A Pro unit is specially designed with a new BB Latching System to prevent BB dropping after removing the magazine. The Latching Arm can also be manually pressed to release the remaining BB from inside the hopup chamber.
***The Dual UV LED Tracer Module is an add-on option to glow BB in the dark. Operating Voltage from 7VDC – 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately)
***Test results: FPS might be increased from 10FPS to 30FPS over the stock setup. Please check your FPS!
IncludesC1 x CNC Aluminum Hopup Chamber M4A Pro (with BB Latching System) unitN2 x CNC Acrylic Side CoverC2 x CNC Brass 2.5mm Side Wing 1 x CNC Steel Pivot PinA1 x CNC Aluminum Hopup Leverl1 x CNC Aluminum Soft Round Nubu1 x CNC Aluminum Soft Flat Nub (4mm)m1 x CNC Aluminum Hard Concave Nub (4mm)i3 x Steel Nub Springn1 x CNC Steel Spring Guideu1 x Steel Upper Compression Springm1 x Steel Center Compression Spring 1 x CNC Delrin Locking C-ClipH1 x CNC Brass Barrel Spacero1 x Brass Barrel Spacer Holder Oringp1 x CNC Aluminum Rotary Dial Knobu1 x CNC Aluminum Inlet Adaptor (OD11mm)p1 x CNC Brass Inlet Spacer
Specification Overall Length: 51.65mmCOverall Height: 37.75mmhInlet Adaptor Outer Diameter (to fit into Gear Box): 11mmaHub Outer Diameter (to fit into Outer Barrel): 12mmmHub Inner Diameter (to fit Nozzle): 8mmbFeeder Outer Diameter (to fit magazine): 8.85mmeFeeder Length (to fit magazine): 6mmrMaterial: Aluminum 6061
Features Machined from a solid aircraft aluminum block with tight tolerances to achieve the most accuracy, consistency, and durabilityMPerformed accurately and consistently on Tokyo Marui (include G&G, KRYTAC, except KWA) Standard M4/M16 AEG series4Precision Rotary Dial Knob for fine hopup adjustmentsARe-engineered the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot Removable Steel Pivot Pin for ease of setup and maintenancePAccepted 21.00mm to 21.25mm nozzle lengthrFully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during useoWisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore AEG Gearbox/HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are sold separately) Mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots(Included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twistingwEquipped with 2 compression springs on top and center to ensure the hopup unit is seated straight and air tight during useiSpecially designed with a new BB Latching System to prevent BB dropping after removing the magazinetThe Latching Arm can also be manually pressed to release the remaining BB from inside the hopup chamberhCompatible with any 11mm inner bore AEG Gearbox/HPA Engine nozzle outlets The Dual UV LED Tracer Module to glow BB in the dark ready!
Shipping
All orders are shipped with one of our hand-picked carriers to ensure a smooth and pain-free delivery experience.
Orders are picked and fulfilled during our standard trading hours. We endevour to ship all orders within 24 hours of payment, and within our opening hours.
We currently only ship to UK Mainland. Please contact us for a bespoke quote if you would like items shipping outside of these areas. Please note: RIFs will only ever be shipped to Mainland UK
If ordering a RIF, please ensure your shipping address matches your registered UKARA address to avoid delays.
If you have any further queries please contact us before placing your order.
Returns
Change of Mind
Faulty Items
Warranty